# Paint Booth Ceiling Air Filter Media (WS-ZR600G)

> Source (HTML): https://www.whalesens.com/products/ws-zr600g-paint-booth-ceiling-filter-media.html
> Last updated: 2026-09-20 16:13:23

Flame-retardant ceiling filter media for automotive, aerospace and general industry paint booths with solvent-laden intake air.

The WS-ZR600G is the flame-retardant grade of the ceiling media fitted to paint booth intake plenums. It forms the last filtration stage the supply air passes before it reaches the coating zone, so overspray that gets through lands on the wet film as a defect. Its outer layer is fire resistant and the roll is thermally bonded, which separates it from the standard grade: it is specified where the solvent load, not the dust load alone, decides which materials are acceptable.

The fibre is polyester, carded into layers of progressive density so the open face takes the bulk of the paint and the denser downstream side stops what passes. The graded structure holds a heavy overspray load without pressure drop climbing as fast as on a flat mat. Because this is media rather than a framed element, one roll covers cut-to-size, segmented framed and full-width deployment. Two checks matter before ordering: the filtration efficiency the booth's finish requires, and the flame retardant level the fire specification calls for. Replace on pressure drop across the ceiling, and inspect for breakthrough before the roll is fully loaded.

## Key features

- **Flame retardant**: S2 (DIN53438), V-0 (UL 94) (Rated for spray booth ceilings where solvent loading is highest)
- **Temperature**: ≤ 100 °C continuous (Withstands 120 °C instant peaks from the baking cycle)
- **Dust holding capacity**: 600 g/m² (Graded density keeps overspray in the depth of the media)
- **Low resistance**: ≤ 45 Pa initial (A low start resistance keeps booth airflow and energy use stable)
- **Progressive density**: 93% average efficiency (Fire-resistant outer layer thermally bonded to a graded core)
- **Roll or cut**: 1.6 m and 2 m rolls (Cut-to-size, framed segments or full-roll deployment)

## Specifications

- Filtration grade: M5 (EN779), MERV9 – MERV10
- Model: WS-ZR600G
- Thickness: 20 ± 2 mm
- Weight: 600 g/m²
- Average weight efficiency: 93%
- Test face velocity: 0.25 m/s
- Dust holding capacity: 600 g/m²
- Initial resistance: ≤ 45 Pa
- Final resistance: 400 Pa
- Rated airflow: 900 m³/h
- Media: 100% polyester fibre (PET), graded density
- High temperature resistance: ≤ 100 °C
- Instant temperature resistance: ≤ 120 °C
- Moisture resistance: ≤ 100% RH
- Flame retardant level: S2 (DIN53438), V-0 (UL 94)
- Filter object: ≥ 1 μm particles

## Applications

Spray Booth,Paint Mist,Introdustrial Dust

## Technical Index


## Material characteristics


## Technical Parameter
