# Spray Booth Air Filter

> Source (HTML): https://www.whalesens.com/products/spray-booth-air-filter.html
> Last updated: 2026-09-20 16:13:23

Ceiling and intake filters that keep overspray out of the coating film and hold finish quality in automotive and industrial spray booths.

A spray booth air filter is a consumable that decides the finish quality of everything painted behind it. It sits at the intake, and the air it lets through is the air the coating sees: overspray, oil mist and dust that get past it land on the wet film as defects that have to be sanded out. That is why booth filtration is judged on finish quality rather than on dust holding alone.

The media is built with progressive density so it can take overspray without collapsing — an open upstream face holds the bulk of the paint, a denser downstream face stops what passes. Grade selection is G3 or G4 depending on how much overspray the booth produces, and flame retardancy is a separate specification that is not optional in a solvent booth. Change-out is driven by differential pressure across the ceiling, not by a calendar interval.

## Key features

- **Progressive density media**: Graded fibre structure (Open upstream face catches overspray, dense downstream face stops what passes)
- **Very low resistance**: 10 – 20 Pa (Keeps booth balance and airflow uniform across the whole ceiling)
- **Even ceiling airflow**: Up to 3,200 m³/h (Uniform media structure avoids the streaks that show up as finish defects)
- **Flame retardant**: F1 / B1 (Specified for booths where solvent-laden air passes the filter)
- **Four frame options**: Paper / aluminium / galvanised / stainless (Match the frame to whether the filter is a consumable or a reusable carrier)
- **Protective mesh**: Double-sided (Plastic-coated or galvanised wire mesh holds the media flat at high face velocity)
- **Moisture and chemical resistant**: 100% RH (Tolerates the solvent and humidity load of a working booth)
- **Standard booth sizes**: 595 × 595 × 46 mm (Also 495 × 595, 495 × 495 and 295 × 595 for partial and edge segments)

## Specifications

- Filtration grade: G3, G4 (EN779); EU3, EU4 (EUROVENT)
- Media: Non-woven fabric with progressive density; optional activated carbon filter cotton
- Frame options: Paper frame, aluminium frame, galvanised iron frame, stainless steel frame
- Separator: Hot melt adhesive
- Sealant: PU (polyurethane) two-component glue
- Sealing strip: Polyurethane foam, EVA
- Protective mesh: Double-sided plastic-coated or galvanised wire mesh
- Standard sizes: 595×595, 495×595, 495×495, 295×595 mm (46 mm deep)
- Initial resistance: 10 Pa (G3) / 20 Pa (G4)
- Final resistance: 250 Pa
- Rated airflow: 1,600 – 3,200 m³/h
- Filtration efficiency: 85% (G3) / 95% (G4)
- Target particles: ≥ 5 μm, ≥ 3 μm (overspray, oil mist and dust)
- High temperature resistance: ≤ 170 °C
- Instant temperature resistance: ≤ 250 °C
- Moisture resistance: 100% RH
- Flame retardancy: F1, B1

## Applications

Automotive Spray Booths, Furniture Coating Lines, Surface Treatment Plants, Commercial Buildings, Food and Beverage Plants, Microelectronics, Schools and Museums, Paint Curing Ovens

## Product Features

- High Performance: Reliable, high adsorption, flame-retardant
- Structural Advantages: Graded density, excellent formaldehyde removal, long service life
- Environmental Resistance: Moisture- and chemical-resistant, withstands 170–250°C

## Technical Index


## Material characteristics


## Technical Parameter
