# Pre Air Filter Media

> Source (HTML): https://www.whalesens.com/products/pre-air-filter-media.html
> Last updated: 2026-09-20 16:13:23

Coarse filtration media for the first stage of an air handling unit, supplied in rolls, slices or framed panels.

Pre air filter media is the coarse filtration stage that sits in front of everything else in an air handling unit. It takes the heaviest part of the dust load so the medium and high efficiency stages behind it are not changed out for visible dust, and it is the cheapest filtration in the system to replace. It is supplied as media rather than as a finished element, for converters and for plants that refit their own frames.

The media is built with progressive density — fibres carded into layers of increasing compaction, so the coarse fraction is caught near the surface and finer dust is trapped deeper in the bed. Grades follow EN779 and cover the usual first-stage duties. Format matters as much as grade: roll, slice and framed versions of the same media suit different users, and thickness and width can be specified to the folding or refitting process. Selection is driven by the dominant particle size and by how much load the stage behind can carry.

## Key features

- **One family, G2 to G4**: 100–500 g/m² (Grade is set by media weight, so specifiers pick arrestance without changing the frame)
- **Progressive density**: Deep-bed capture (Carded layers bonded by hot air hold dust through the mat, not on the surface)
- **Low initial resistance**: 20–25 Pa (Measured at the rated 1–2 m/s face velocity of each grade)
- **High dust holding**: 380–680 g/m² (Heavier grades run longer between changes on the same frame)
- **Flame retardant options**: F1 / B1 (For ducts, ovens and enclosed plant where the specification calls for it)
- **Three delivery formats**: Roll / slice / framed (Rolls for converters, slices for replacements, framed pads for direct install)
- **Moisture resistant**: 100% RH (Continuous service up to 100 °C, instant peaks to 120 °C)
- **Custom converting**: 5–25 mm thick (Custom roll width and length, with grade colour coding on request)

## Specifications

- Filtration grade: G2, G3, G4 (EN779); EU2, EU3, EU4 (EUROVENT)
- Media: Non-woven polyester (PET) fibre, progressive density
- Media weight: 100, 150, 300, 400, 500 g/m²
- Thickness: 5, 10, 15, 20, 25 mm
- Test face velocity: 1 – 2 m/s (grade dependent)
- Initial resistance: 20 – 25 Pa
- Final resistance: 125 – 250 Pa
- Dust holding capacity: 380 – 680 g/m²
- Average arrestance: 68% (G2) / 83–85% (G3) / 91–95% (G4)
- Target particles: ≥ 5 μm coarse dust, lint and fibre
- Continuous temperature: ≤ 100 °C
- Instant temperature: ≤ 120 °C
- Moisture resistance: 100% RH
- Flame retardancy: F1, B1
- Delivery formats: Roll, pre-cut slice, framed pad

## Applications

HVAC Systems, Industrial Pre-filtration, Spray Booth Intake, Equipment Rooms, Fresh Air Handling Units, Baking Oven Air Supply

## Technical Index


## Material characteristics


## Technical Parameter
