# High Temperature Panel Filter

> Source (HTML): https://www.whalesens.com/products/high-temp-panel-filter.html
> Last updated: 2026-09-20 16:13:23

Pre-filters built for coating ovens, curing lines and drying tunnels where standard synthetic media will not survive.

A high temperature panel filter exists because ordinary panel filters cannot survive the place it is needed. Coating ovens, curing lines, baking and drying tunnels all run at temperatures that soften or char standard synthetic media, and the filter has to keep working there without becoming a fire risk itself.

This panel is built for that duty from both ends: a flame-retardant synthetic fibre chosen for continuous duty at 240 °C, held in a frame that does not distort as it heats and cools. The resistance figures are modest by design — the point is not low resistance but a wide working window between a clean filter and a loaded one, so change-out is predictable. Confirm the continuous operating temperature first, and where the oven atmosphere carries solvent or coating vapour, treat flame retardancy as a separate specification rather than a detail.

## Key features

- **240 °C continuous**: Made for oven duty (Flame-retardant synthetic media and a metal frame that does not deform)
- **Low resistance at temperature**: 50 Pa initial (Rated at 1.0 m/s face velocity on the 500 × 500 mm element)
- **Wide operating window**: 50 → 250 Pa (A long change-out interval matters when the oven has to be shut down to change it)
- **Protects the product**: Dust, debris, coating particles (The filter is there to keep oven-borne particles off the work, not only to protect equipment)
- **Flame retardant media**: Non-drip construction (Specified where the oven atmosphere carries solvent or coating vapour)
- **Moisture and chemical resistant**: 100% RH (Low moisture absorption keeps the media stable through heat cycling)
- **500 × 500 mm standard**: 15 and 21 mm deep (Custom sizes available to the oven's own holding frame)
- **G2 to G4 grades**: One frame (Dust load decides the grade rather than the frame dimensions)

## Specifications

- Filtration grade: G2, G3, G4 (EN779); EU2, EU3, EU4 (EUROVENT)
- Media: Synthetic flame-retardant fibre
- Frame options: Galvanised steel, stainless steel, aluminium
- Standard sizes: 500 × 500 × 15 mm (G3), 500 × 500 × 21 mm (G4)
- Initial resistance: 50 Pa
- Final resistance: 250 Pa
- Rated face velocity: 1.0 m/s
- Average weight efficiency: 86%
- Target particles: 1 – 10 μm coarse dust and foreign particles
- High temperature resistance: ≤ 240 °C
- Moisture resistance: 100% RH
- Typical duty: Coating ovens, curing ovens, baking, drying, heat treatment
- Custom sizes: Available to the holding frame dimension

## Applications

Industrial Coating Ovens, Paint Curing Ovens, Baking and Drying Lines, Heat Treatment Furnaces, Hot Air Ovens, General Industrial Dust Filtration

## Technical Index


## Material characteristics


## Technical Parameter
