# Fiberglass Filter Media

> Source (HTML): https://www.whalesens.com/products/fiberglass-filter-media.html
> Last updated: 2026-09-20 16:13:23

Coarse fiberglass media for paint mist and overspray, supplied as progressive-density rolls, cut slices or framed pads.

Fiberglass filter media is the paint-arrestor layer in a spray booth: the stage that catches overspray before it reaches the exhaust ducting or the next filter in the bank. It is a non-woven glass fibre mat rather than a fine filter, and it is judged on how much sticky paint it holds before the face blinds over — dust holding capacity, not particle efficiency, is the number that decides how often it is changed.

The fibre is laid so that density increases from the inlet side to the outlet side. The open face takes the paint mist at low velocity and the tighter back layer stops what passes through, which is why one mat keeps working after the front has visibly loaded. Media is supplied as cut slices, framed pads or full rolls in 60 mm and 100 mm thicknesses, so a booth can be re-lined to the panel size instead of cutting a roll to fit.

## Key features

- **Average weight efficiency**: 92% – 99% (Measured on the two standard densities)
- **Dust holding capacity**: 3200 – 4900 g/m² (The number that decides how long a booth lining lasts)
- **Low airflow resistance**: 15 – 20 Pa (At 0.7–1.75 m/s test velocity)
- **Progressive density**: Open face, tight back (Density increases along the airflow, so the face does not blind over first)
- **Two standard thicknesses**: 60 mm and 100 mm (Cut to the booth or run as a full roll)
- **Heat resistance**: 170°C / 200°C instant (Continuous and short-term limits for drying and baking lines)
- **Flame retardant**: F1, B1 (Standard grade for coating and baking areas)
- **Slices, pads or rolls**: Framed on request (Supplied cut to size so a booth can be re-lined without trimming a roll)

## Specifications

- Filtration grade: G3 (EN779), EU3 (EUROVENT)
- Media type: Non-woven glass fibre, progressive density
- Standard thicknesses: 60 mm and 100 mm
- Weight: 240 g/m² and 320 g/m²
- Test velocity: 0.7 – 1.75 m/s
- Dust holding capacity: 3200 – 4900 g/m²
- Initial resistance: 15 Pa and 20 Pa
- Final resistance: 250 Pa and 280 Pa
- Average weight efficiency: 92% – 99%
- Continuous temperature: ≤170°C
- Instant temperature: ≤200°C
- Moisture resistance: 100% RH
- Flame retardant level: F1, B1
- Filter object: Paint mist, oil mist and dust particles
- Available formats: Custom slices, framed pads and full rolls

## Applications

Paint Mist Filtration in Coating Lines, Spray Booth Exhaust, Baking Booths, Automotive Spray Shops, Furniture Factories, Kitchen Grease Filtration, General Ventilation Pre-filtration

## Product Features


## Technical Index


## Material characteristics


## Technical Parameter
