# F6 Medium Efficiency Bag Filter

> Source (HTML): https://www.whalesens.com/products/f6-medium-efficiency-bag-filter.html
> Last updated: 2026-09-20 16:13:23

Medium efficiency pocket filters that protect HEPA and terminal stages in HVAC, cleanroom and spray-booth air systems.

An F6 bag filter is the medium efficiency stage that most industrial air systems are built around. It sits between the coarse pre-filter and the final filter, catching the dust the pre-filter passes so it never loads the HEPA stage behind it. Where the pre-filter takes out the visible dust and the final filter takes out the fine fraction, the F6 does the bulk of the work in between.

The construction is what gives it that role. Instead of a flat pad, the media is sewn or welded into pockets that hang into the airflow, which keeps the velocity through the media low and lets an element keep working for months rather than weeks. And because the whole F5 to F9 range shares the same frame dimensions, a cleanroom or a spray booth can be upgraded later without touching the holding frame — the practical reason to standardise on this pocket format instead of mixing element types across a plant.

## Key features

- **Large media area**: 2.12 – 5.68 m² (Pocket geometry packs far more media into a standard 592 mm frame)
- **Low airflow resistance**: 50 – 65 Pa initial (Measured across the three standard sizes at rated airflow)
- **High dust holding**: Final resistance 400 Pa (A 400 Pa final resistance against a 50–65 Pa start is a wide working window)
- **3, 6 or 8 pockets**: Matched to airflow (Pocket count scales with the volume the unit actually handles)
- **G4 to F9 in one frame**: Grade upgrade, same size (Move from F6 to F7 or F8 later without touching the holding frame)
- **Protects the final stage**: Upstream of HEPA (Reduces the load on H13 terminal filters and extends their service life)
- **Standard and custom sizes**: 550 / 600 mm deep (287×592 and 592×592 faces in 550 and 600 mm depths, plus custom builds)
- **Galvanised or aluminium frame**: Rigid pocket header (Header and pocket seams hold their spacing so the pockets stay open in service)

## Specifications

- Filtration grade: F6 (F5, F7, F8, F9 available in the same frame)
- Efficiency: 60% – 65% (EN779 F6)
- Media: Special non-woven synthetic fibre, or glass fibre
- Frame: Galvanised steel or aluminium alloy
- Standard sizes: 287×592×550, 592×592×550, 592×592×600 mm
- Pocket count: 3, 6, 8
- Media area: 2.12 – 5.68 m²
- Initial resistance: 50 – 65 Pa
- Final resistance: 400 Pa
- Rated airflow: 1,700 – 3,400 m³/h
- Recommended final resistance alarm: Set at 400 Pa on the differential pressure gauge
- Target particles: Medium efficiency duty, upstream of the final filter
- Frame material: Galvanised steel or aluminium alloy
- Custom sizes: Available to the holding frame dimension

## Applications

Industrial Cleanrooms in Pharmaceuticals, Hospitals, Electronics, Food Processing, Automotive Spray Booths, Commercial HVAC, Fresh Air Units

## Product Features

- Available in grades G4–F9 with large frontal area for high dust-holding capacity and low airflow resistance.
- Constructed with special non-woven or fiberglass media; frames of galvanized steel or aluminum alloy.
- Standard and custom sizes; efficiency 60%-65%; suitable for industrial cleanrooms in pharmaceuticals, hospitals, electronics, food processing, and automotive spray booths.

## Technical Parameter
